RBC10 Fiberglide Fabroid Plain Brgs CJS2012 CJS2016 CJS2020 CJS2024 CJS2212

We are in the line of Bearing Industry for around 15 years, Common, uncommon, or customized bearings, We all could supply. email me if you need anything or have any questions. Sales@needbearings.com https://needbearings.com/

bearing

Product Number

B E A R I N G S SELECTION GUIDE SELF-LUBRICATING, MAINTENANCE-FREE BEARINGS
TYPE						DESCRIPTION							DIMENSIONS							APPLICATIONS
						CJS Journal bearings, split seam steel backing, zinc plated							Nom. shaft diameter- .375 to 10.000 Bearing length- .250 to 6.50							The CJS bearing works excellent in any pivot or linkage application. For construction and farm equipment, this product is typically used in kingpins, rock shafts, differentials, hinges, pedals and many other pivot points.
						CJT Journal bearings, thin walled, split seam steel backing, zinc plated							Nom. shaft diameter- .500 to 10.000 Bearing length- .375 to 6.50							This bearing is designed as a direct replacement with conventional 1/16″ wall bushings. These bearings are used in self-lubricated chain, variable speed sheaves, boom pivot points on fork lifts and many similar applications.
						CJH Journal bearings, heavy walled, split seam steel backing, zinc plated							Nom. shaft diameter- .750 to 10.000 Bearing length- .375 to 11.00							This bearing is designed as a direct replacement with the conventional 1/8″ wall bronze bushings. Typical applications include suspension points on large trucks and railroad cars. These products are also used in the boom foot pivot of large cranes.
						CJM Metric Journal bearings, split seam steel backing, zinc plated							Nom. shaft diameter- 8MM to 120MM Bearing length- 8MM to 165MM							This product is the metric equivalent to the CJS product and used in similar applications.
						LJS Journal bearings, liner type, non-metallic							Nom. shaft diameter- 1.000 to 12.000 Bearing length- .375 to 6.50							These bearings are used in many harsh applications and in food handling machinery. Typical applications include butterfly valves and trunnion support pivots. This product is also used in sheaves and hoists for marine applications.
						FTS Thrust bearings, metal- backed, single sided							Nom. shaft diameter- .250 to 3.250 I.D. – .280 to 3.312 O.D. – .500 to 4.875							These bearings accommodate thrust in clutches, hospital beds, screw jacks, valve actuators, vehicle suspensions, and many other applications.
						LTD Thrust bearings, laminated phenolic- backed, double-sided							Nom. shaft diameter- .250 to 3.250 I.D. – .280 to 3.312 O.D. – .500 to 4.875							These bearings are used in cam actuator arms, turntable support bearings, exercise equipment, truck differentials and many other applications.
						FTP Thrust packs, Two piece assembly							Nom. shaft diameter- I.D. – 1.000 to 3.000 O.D. -1.750 to 4.625							These bearings are used in articulated frame joints, pivot arm supports, kingpins and many other applications.
						SJS Solid, machined journal bearing, metal backed							Nom. shaft diameter- .500 to 5.000 Bearing length- 1.00 – 4.00							Ideal for construction, farm, and material handling equipment, especially where tight tolerances are necessary.
						Self-Lubricated Spherical Bearing Swaged and equipped with self-lubri- cating liner system to reduce friction.							Nom. shaft diameter- 1900-1.00 Bearing length- .437-1.375							Used in hydraulic cylinder and actuators as well as control linkages.
2
®
B E A R I N G S PRODUCT OVERVIEW SELF-LUBRICATING BEARINGS																									Fiberglide®/Fabroid® is a proprietary
Fiberglide®/Fabroid® bearings offer 17 distinct advantages over conven- tional lubricated bearings: 1. Design freedom—Fiberglide®/Fabroid® bearings can be incorporated into internal component assemblies inaccessible to conventional lubrication technique, eliminating costly maintenance tear down. 2. Maintenance free—The self-lubricating nature of Fiberglide®/Fabroid® makes it an ideal selection for equipment providing service to remote environments such as oil and gas transmission lines and pumping stations. 3. Operation without lubrication while tolerating many lubricating and non-lubricating fluids. 4. Environmentally friendly, lead-free, green product. 5. High dynamic load-carrying (up to 40,000 psi). 6. Inherent vibration and noise dampening qualities. 7. Low coefficient of friction. 8. Freedom from stick-slip. 9. Absence of cold-flow tendencies of solid and filled PTFE resins. 10. High resistance to fatigue under shock loads. 11. Eliminating fretting corrosion. 12. Resistant to attack by most substances. 13. Operation at temperatures beyond the range of most lubricants (-320°F to 400°F). 14. Fiberglide® bearings have been tested to have 7-10 times the life of a DU® Product, see chart on page 22. 15. Good dimensional stability. 16. Compatible with a wide range of mating materials. 17. Electrically non-conducting. 17. Non-magnetic. TYPICAL APPLICATIONS Fiberglide®/Fabroid® bearings are being used by many basic manufac- turing industries where they have proven their economy, convenience, and dependability. • Steering systems for trucks, farm tractors, off-highway equipment • Heavy-duty suspension systems of trucks, tractors and related equip- ment • Brakes for trucks, automobiles, off-road vehicles • Transmission shift linkages and pivots • Butterfly, ball plug valves • Clutches and variable speed sheaves • Marine equipment • Pneumatic and hydraulic tools and actuators • Conveying and material handling equipment • Bridge and other structure support bearings • Recreational vehicle suspension and controls • Packaging machinery • Textile machinery • Food processing equipment • Wherever heavy loading and low speed oscillations are encountered Fiberglide®/Fabroid® are registered trademarks of Transport Dynamics Division, RBC Bearings, DU® is a registered trademark of GGB.																								self-lubricating bearing material of woven polytetrafluoroethylene or PTFE fibers applied to a rigid backing. To assure the best possible bond between PTFE fibers and backing material, a secondary, more readily bondable fiber (which may vary with appli- cation requirements) is interwoven with the PTFE fibers presented on the bearing side of the fabric. Fiberglide®/Fabroid® bearings are unique in their ability to resist coldflow under extremely high loads because the monofilament fibers have a tensile strength approximately 25 times greater than straight PTFE resins. Cold flow is also minimized by the effective entrapment of the fiber bundles by the high-strength bonding resins. Fiberglide®/Fabroid® bearings are completely self-lubricating and normally run dry. However, they can also be used where lubricating or other fluids are present. Operating dry, Fiberglide®/Fabroid® bearings are recommended where low surface speeds are combined with high loads. Fiberglide®/Fabroid® bearings are available with many backing materials in a wide variety of standard configurations. In addition, Transport Dynamics offers spe- cial bearings with an almost unlimited range of configurations and metal backings. Fabroid® liners are designed to carry higher loads with improved wear life. Fabroid® liner types are woven PTFE glass fabrics utilizing various thermoset resins depending on product type. This construc- tion leaves the PTFE fibers exposed on the working surface without contact to the resin. A resin is used in the prepreg and as the bonding adhesive. Due to the construction, the liner is highly compressible and able to absorb distortions in mating surfaces, and has a low friction surface from the start with no break in period. Construction of typical Fiberglide®/Fabroid® bearing: 1. PTFE fabric 2. Adhesive bonding agent 3. Metal

3


®
B E A R I N G S Series CJS


om. haft
ia.
N S D
Liner FIBERGLIDE® Woven PTFE Fabric																						Split
*Recommended housing bores are for steel housings. Contact engineering for recommended housing dimensions for alternate materials. STANDARD INCH SERIES
PART NUMBER		RECOMMENDED SHAFT DIAMETER MIN/MAX (in.)						RECOMMENDED* HOUSING BORE MIN/MAX (in.)						BEARING LENGTH +.000-.020 (in.)					WALL THICKNESS (in.) REF							Static Load (lbf)									BEARING WEIGHT (lbs)
CJS2012														0.750												28,125									0.050
CJS2016 CJS2020		1.2475/1.2500						1.4055/1.4065						1.000 1.250					0.078							37,500 46,875									.067 .083
CJS2024														1.500												56,250									0.100
CJS2212														0.750												30,937									0.055
CJS2216 CJS2222		1.3730/1.3750						1.5305/1.5315						1.000 1.375					0.078							41,250 56,719									.073 .100
CJS2224														1.500												61,875									0.109
CJS2416														1.000												45,000									0.079
CJS2424 CJS2428		1.4975/1.500						1.6555/1.6565						1.500 1.750					0.078							67,500 78,750									.119 .139
CJS2816														1.000												52,500									0.111
CJS2824 CJS2828		1.7475/1.7500						1.9375/1.9385						1.500 1.750					0.094							78,750 91,875									.167 .195
CJS2832														2.000												105,000									0.223
CJS3216														1.000												60,000									0.127
CJS3224		1.997/2.000						2.1875/2.1885						1.500					0.094							90,000									0.190
CJS3232														2.000												120,000									0.253
CJS3618		2.2475/2.250						2.4375/2.4385						1.125					0.094							37,969									0.844
CJS3636														2.250												151,875									0.319
CJS4020		2.4970/2.5000						2.6875/2.6885						1.250					0.094							93,750									0.196
CJS4040														2.500												187,500									0.392
CJS4422		2.7470/2.750						2.9375/2.9385						1.375					0.094							113,437									0.236
CJS4444														2.750												226,875									0.472
CJS4824		2.9970/3.000						3.1875/3.1885						1.500					0.094							135,000									0.280
CJS4848														3.000												270,000									0.561
CJS5628		3.4965/3.5000						3.6875/3.6885						1.750					0.094							183,750									0.380
CJS5656														3.500												367,500									0.760
CJS6432 CJS6464		3.9965/4.000						4.1875/4.1885						2.000 4.000					0.094							240,000 480,000									.495 .989
Part number example: CJS1216 is a split seam steel Fiberglide® journal bearing with a .750 in. bore, 1.00 in. long. Special and larger sizes can be supplied upon special order.
SPLIT SEAM STEEL BACKING Fiberglide®/Fabroid® JOURNAL BEARINGS 5
®
B E A R I N G S
Fiberglide® split seam steel journal bearings are designed to meet industry standards for self-lubricating bushings. Carbon steel is normally used as a backing material, with the external surfaces plated to resist corrosion. Other metals can be supplied upon special order. Typical applications include automo- tive vehicles, farm equipment, construction and material handling equipment. Fabroid® can also be supplied for special applications – consult Transport Dynamics engineering department. For bearing installation, see page 24.
STANDARD METRIC SERIES
PART NUMBER		RECOMMENDED SHAFT DIAMETER MIN/MAX (mm)						RECOMMENDED* HOUSING BORE MIN/MAX (mm)						BEARING LENGTH ± 0.25 (mm)					WALL THICKNESS (mm) REF							STATIC LOAD (Newtons)									BEARING WEIGHT (grams)
CJM0808														8.00					1.0							16,545									1.295
CJM0810 CJM0812		7.972/7.987						10.000/10.015						10.00 12.00					1.0 1.0							16,545 16,545									1.619 1.943
CJM1008														8.00					1.0							24,826									1.586
CJM1010 CJM1012		9.972/9.987						12.000/12.018						10.00 12.00					1.0 1.0							24,826 24,826									1.982 2.378
CJM1020														20.00					1.0							24,826									3.964
CJM1208														8.00					1.0							34,747									1.876
CJM1210 CJM1212		11.966/11.984						14.000/14.018						10.00 12.00					1.0 1.0							34,747 34,747									2.346 2.815
CJM1220														20.00					1.0							34,747									4.691
CJM1415		13.966/13.984						16.000/16.018						15.00					1.0							46,331									4.060
CJM1420														20.00					1.0							46,331									5.413
CJM1512 CJM1515		14.966/14.984						17.000/17.018						12.00 15.00					1.0 1.0							52,744 52,744									3.464 4.330
CJM1525														25.00					1.0							52,744									7.217
CJM1612														12.00					1.0							59,570									3.681
CJM1615 CJM1620		15.966/15.984						18.000/18.018						15.00 20.00					1.0 1.0							59,570 59,570									4.601 6.134
CJM1625														25.00					1.0							59,570									7.668
CJM1815 CJM1820 CJM1825		17.966/17.984						20.000/20.021						15.00 20.00 25.00					1.0 1.0 1.0							74,474 74,474 74,474									5.150 6.867 8.583
CJM2015														15.00					1.5							95,138									8.699
CJM2020 CJM2025		19.959/19.980						23.000/23.021						20.00 25.00					1.5 1.5							95,138 95,138									11.599 14.498
CJM2030														30.00					1.5							95,138									17.398
Part number example: CJM1012 is a split seam steel Fiberglide® / journal bearing with a 10mm bore, 12mm long. Larger diameters can be supplied.
6 Fiberglide®/Fabroid® JOURNAL BEARINGS SPLIT SEAM STEEL BACKING
®
B E A R I N G S Series CJM


om. haft
ia.
N S D
Liner FIBERGLIDE® Woven PTFE Fabric																							Split
*Recommended housing bores are for steel housings. Contact engineering for recom- mended housing dimensions for alternate materials. STANDARD METRIC SERIES
PART NUMBER		RECOMMENDED SHAFT DIAMETER MIN/MAX (mm)						RECOMMENDED* HOUSING BORE MIN/MAX (mm)						BEARING LENGTH ± 0.25 (mm)					WALL THICKNESS (mm) REF							STATIC LOAD (Newtons)									BEARING WEIGHT (grams)
CJM2215														15.00					1.5							11,3754									9.508
CJM2220 CJM2225		21.959/21.980						25.000/25.021						20.00 25.00					1.5 1.5							11,3754 11,3754									12.678 15.847
CJM2230														30.00					1.5							11,3754									19.016
CJM2415														15.00					1.5							13,4025									10.317
CJM2420 CJM2425		23.959/23.980						27.000/27.021						20.00 25.00					1.5 1.5							13,4025 13,4025									13.757 17.196
CJM2430														30.00					1.5							13,4025									20.635
CJM2515														15.00					1.5							14,4781									10.722
CJM2520														20.00					1.5							14,4781									14.296
CJM2525 CJM2530		24.959/24.980						28.000/28.021						25.00 30.00					1.5 1.5							14,4781 14,4781									17.870 21.444
CJM2550														50.00					1.5							14,4781									35.740
CJM3010														10.00					2.0							21,2025									11.477
CJM3015 CJM3020		29.959/29.982						34.000/34.025						15.00 20.00					2.0 2.0							21,3046 21,4066									17.215 22.953
CJM3025														25.00					2.0							21,5086									28.692
CJM3030														30.00					2.0							21,6106									34.430
CJM3520														20.00					2.0							29,1870									26.583
CJM3530														30.00					2.0							29,3235									39.874
CJM3535		34.950/34.975						39.000/39.025						35.00					2.0							29,4600									46.520
CJM3540														40.00					2.0							29,5965									53.166
CJM3550														50.00					2.0							29,7330									66.457
CJM4020														20.00					2.0							38,6896									30.175
CJM4030 CJM4040		34.931/34.970						44.000/44.025						30.00 40.00					2.0 2.0							38,8656 39,0416									45.263 60.350
CJM4050														50.00					2.0							39,2176									75.438
CJM4520														20.00					2.0							50,5862									42.553
CJM4530 CJM4540		44.000/44.025						50.000/50.025						30.00 40.00					2.0 2.0							50,8112 51,0362									63.830 85.106
CJM4545														45.00					2.0							51,2611									95.744
CJM4550														50.00					2.0							51,4861									106.383
Part number example: CJM1012 is a split seam steel Fiberglide® / journal bearing with a 10mm bore, 12mm long. Larger diameters can be supplied.
SPLIT SEAM STEEL BACKING Fiberglide®/Fabroid® JOURNAL BEARINGS 7
®
B E A R I N G S
The constant wall thickness of .062 of the CJT SERIES makes them dimensionally interchangeable with other types of steel bearings commonly used. They provide all the advantages of Fiberglide® at minimum cost. Carbon steel is normally used as a backing material, with the external sur- faces plated to resist corrosion. Other metals can be supplied upon special order. Typical applications include automotive vehicles, farm equipment, con- struction and material handling equipment. A Fabroid® Liner can also be supplied for special applications – consult Transport Dynamics engineering department. For bearing installation, see page 24. STANDARD THIN WALL INCH SERIES
PART NUMBER		RECOMMENDED SHAFT DIAMETER MIN/MAX (in.)						RECOMMENDED* HOUSING BORE MIN/MAX (in.)						BEARING LENGTH (in.) +.000 -.020					WALL THICKNESS (in.) REF							STATIC LOAD (lbf)									BEARING WEIGHT (lbs)
CJT0808														0.500					0.062							7,500									0.011
CJT0810		.4936/.5000						.6240/.6250						0.625					0.062							9,375									0.014
CJT0812														0.750					0.062							11,250									0.017
CJT0816														1.000					0.062							15,000									0.023
CJT1008														0.500					0.062							9,375									0.014
CJT1010		.6234/.6250						.7490/.7500						0.625					0.062							11,719									0.017
CJT1012														0.750					0.062							14,062									0.021
CJT1016														1.000					0.062							18,750									0.028
FOR SIZES 12XX THROUGH 16XX USE CJS SERIES (PAGE 4)
CJT1812														0.750					0.062							25,312									0.036
CJT1816		1.1230/1.1250						1.2495/1.2505						1.000					0.062							33,750									0.048
CJT1818														1.125					0.062							37,969									0.054
CJT1824														1.500					0.062							50,625									0.072
CJT2012														0.750					0.062							28,125									0.040
CJT2016		1.2475/1.2500						1.3745/1.3755						1.000					0.062							37,500									0.053
CJT2020														1.250					0.062							46,875									0.066
CJT2024														1.500					0.062							56,250									0.079
CJT2212														0.750					0.062							30,937									0.043
CJT2216		1.3725/1.3750						1.4995/1.5005						1.000					0.062							41,250									0.058
CJT2222														1.375					0.062							56,719									0.080
CJT2224														1.500					0.062							61,875									0.087
CJT2416														1.000					0.062							45,000									0.063
CJT2424		1.4975/1.5000						1.6245/1.6255						1.500					0.062							67,500									0.094
CJT2428														1.750					0.062							78,750									0.110
Part number example: CJT2024 is a split seam Fiberglide® / journal bearing with 1.25 in. bore, 1.50 in. long. Larger diameters can be supplied.
8 Fiberglide®/Fabroid® JOURNAL BEARINGS THIN-WALLED SPLIT SEAM STEEL BACKING
®
B E A R I N G S Series CJT


om. haft
ia.
N S D
Liner FIBERGLIDE® Woven PTFE Fabric																					Split
*Recommended housing bores are for steel housings. Contact engineering for recom- mended housing dimensions for alternate materials. STANDARD THIN WALL INCH SERIES
PART NUMBER		RECOMMENDED SHAFT DIAMETER MIN/MAX (in.)						RECOMMENDED* HOUSING BORE MIN/MAX (in.)						BEARING LENGTH (in.) +.000 -.020					WALL THICKNESS (in.) REF							STATIC LOAD (lbf)									BEARING WEIGHT (lbs)
CJT2816 CJT2824 CJT2828 CJT2832		1.7475/1.7500						1.8745/1.8755						1.000 1.500 1.750 2.000					.062 .062 .062 .062							52,500 78,750 91,875 105,000									.073 .109 .128 .146
CJT3216 CJT3224 CJT3232		1.997/2.0000						2.1245/2.1255						1.000 1.500 2.000					.062 .062 .062							60,000 90,000 120,000									.083 .124 .166
CJT3618 CJT3636		2.2470/2.2500						2.3745/2.3755						1.125 2.250					.062 .062							37,969 151,875									.789 .209
CJT4020 CJT4040		2.4970/2.5000						2.6245/2.6255						1.250 2.500					.062 .062							93,750 187,500									.129 .258
CJT4422 CJT4444		2.7475/2.7500						2.8745/2.8755						1.375 2.750					.062 .062							113,438 226,875									.156 .311
CJT4824 CJT4848		2.9975/3.0000						3.1245/3.1255						1.500 3.000					.062 .062							135,000 270,000									.185 .370
CJT5628 CJT5656		3.4965/3.5000						3.6245/3.6255						1.750 3.500					.062 .062							183,750 367,500									.251 .501
CJT6030 CJT6060		3.7465/3.7500						3.8745/3.8755						1.875 3.750					.062 .062							210,938 421,875									.287 .575
CJT6432 CJT6464		3.9965/4.00						4.1245/4.1255						2.000 4.000					.062 .062							240,000 480,000									.327 .654
Part number example: CJT2024 is a split seam Fiberglide® / journal bearing with 1.25 in. bore, 1.50 in. long. Larger diameters can be supplied.
THIN-WALLED SPLIT SEAM STEEL BACKING Fiberglide®/Fabroid® JOURNAL BEARINGS 9
®
B E A R I N G S The constant wall thickness of 1/8 in. (.125) for the CJH series makes them dimensionally inter- changeable with many bronze and filament wound bushings. Carbon steel is used as a backing mate- rial, with the external surfaces plated to resist cor- rosion. Typical applications include farm equip- ment, construction and material handling equip- ment. Fabroid® can also be supplied for special applications. Consult Transport Dynamics engi- neering department. For bearing installation, see																											Series CJH Length N Shaft Dia. Liner FIBERGLIDE® Woven PTFE Fabric Replaces Bronze Bushings											Split


om.
page 24.																			*Recommended housing bores are for steel housings. Contact engineering for recommended housing dimensions for alternate materials.
STANDARD HEAVY WALL INCH SERIES
PART NUMBER		RECOMMENDED SHAFT DIAMETER MIN/MAX (in.)						RECOMMENDED* HOUSING BORE MIN/MAX (in.)						BEARING LENGTH (in.) +.000 -.020					WALL THICKNESS (in.) REF							Static Load (lbf)									BEARING WEIGHT (lbs)
CJH1204 CJH1208 CJH1212		.748/.750						.9995/1.0005						.250 .500 .750					0.125							5,625 11,250 16,875									.018 .035 .053
CJH1608 CJH1612		.998/1.00						1.2495/1.2505						.500 .750					0.125							15,000 22,500									.045 .068
CJH1616														1.000												30,,000									0.090
CJH2016														1.000												37,500									0.110
CJH2020 CJH2024		1.248/1.250						1.4995/1.5005						1.250 1.500					0.125							46,875 56,250									.138 .166
CJH2216														1.000												41,250									0.120
CJH2220 CJH2224		1.373/1.375						1.6245/1.6255						1.250 1.500					0.125							51,563 61,875									.151 .181
CJH2420														1.250												56,250									0.163
CJH2424 CJH2432		1.4975/1.5000						1.7495/1.7505						1.500 2.000					0.125							67,500 90,000									.196 .261
CJH2820														1.250					0.125							65,625									0.188
CJH2824		1.7475/1.7500						1.9995/2.0005						1.500												78,750									0.226
CJH2832														2.000												105,000									0.301
CJH3224														1.500												90,000									0.256
CJH3232 CJH3248		1.9970/2.000						2.2495/2.2505						2.000 3.000					0.125							120,000 180,000									.341 .512
CJH3624														1.500												101,250									0.286
CJH3632 CJH3648		2.247/2.250						2.4995/2.5005						2.000 3.000					0.125							135,,000 202,500									.381 .572
CJH4032														2.000												150,000									0.421
CJH4040 CJH4048		2.497/2.500						2.7495/2.7505						2.500 3.000					0.125							187,500 225,000									.527 .632
CJH4432		2.747/2.750						2.9995/3.0005						2.000												165,000									0.462
CJH4440														2.500					0.125							206,250									0.577
CJH4448														3.000												247,500									0.692
CJH4832														2.000												180,000									0.502
CJH4840 CJH4848		2.997/3.000						3.2495/3.2505						2.500 3.000					0.125							135,000 270,000									.376 .753
CJH5232														2.000												195,000									0.542
CJH5240 CJH5248		3.2465/3.250						3.4995/3.5005						2.500 3.000					0.125							243,750 292,500									.677 .813
CJH5632		3.4965/3.500						3.7495/3.7505						2.000					0.125							210,000									0.434
CJH5664														4.000												420,000									0.868
CJH6032		3.7465/3.750						3.9995/4.0005						2.000					0.125							225,000									0.622
CJH6064														4.000												450,000									1.244
CJH6432		3.9965/4.000						4.2495/4.2505						2.000					0.125							240,000									0.662
CJH6464														4.000												480,000									1.325
Part number example: CJH1216 is a coiled steel journal bearing with .75 in. bore, 1.00 in. long. Special and larger sizes can be supplied upon special order. 10 Fiberglide®/Fabroid® JOURNAL BEARINGS HEAVY WALL SPLIT SEAM STEEL BACKING
®
B E A R I N G S The Fiberglide® Liner Type bearing provides high																															Series LJS
load capacity and low friction in the form of a thin- Length walled sleeve for use in butterfly valves, trunnion bear- ings, ball and plug valve stem bushings, hydraulic and


om.
pneumatic cylinder bushings, food handling machinery, and door hinge bushings, among others. Because these bearings are completely non-metallic-fabricated of woven PTFE fibers on the bore supported by a lami- nated backing-there is no possibility of corrosion. Maximum compressive strength is 10,000 psi, with																																N Shaft Dia. Liner FIBERGLIDE® Woven PTFE Fabric							Split
operating temperature range of -250°F to 200°F. Maximum speeds are typically 20 surface FPM.																													*Recommended housing bores are for steel housings. Contact engineering for recom- mended housing dimensions for alternate materials.
NON-METALLIC BEARING INCH SERIES
PART NUMBER			RECOMMENDED SHAFT DIAMETER (in.)								RECOMMENDED* HOUSING BORE MIN/MAX (in.)						BEARING LENGTH (in.) +.000 -.025							WALL THICKNESS (in.) REF										STATIC LOAD (lbf)
LJS1616 LJS1624 LJS1632			1.000								1.061/1.062						1.000 1.500 2.000							.027/.030										10,000 15,000 20,000
LJS1818 LJS1828 LJS1836			1.125								1.186/1.187						1.125 1.500 2.250							.027/.030										12,656 16,875 25,313
LJS2020 LJS2030			1.250								1.311/1.312						1.250 1.875							.027/.030										15,625 23,438
LJS2040																	2.500																	31,250
LJS2222 LJS2232			1.375								1.436/1.437						1.375 2.000							.027/.030										18,906 27,500
LJS2244																	2.750																	37,813
LJS2424 LJS2436			1.500								1.561/1.562						1.500 2.250							.027/.030										22,500 33,750
LJS2448																	3.000																	45,000
LJS2828 LJS2842			1.750								1.811/1.812						1.750 2.625							.027/.030										30,625 45,938
LJS2856																	3.500																	61,250
LJS3232			2.000								2.126/2.127						2.000							.059/.062										40,000
LJS3248																	3.000																	60,000
LJS3636			2.250								2.376/2.377						2.250							.059/.062										50,625
LJS3654																	3.375																	75,938
LJS4040			2.500								2.626/2.627						2.500							.059/.062										62,500
LJS4060																	3.750																	93,750
LJS4444			2.750								2.876/2.877						2.750							.059/.062										75,625
LJS4466																	4.125																	113,438
LJS4848			3.000								3.126/3.127						3.000							.059/.062										90,000
LJS4872																	4.500																	135,000
LJS5656			3.500								3.626/3.627						3.500							.059/.062										122,500
LJS5684																	5.250																	183,750
LJS6464			4.000								4.126/4.127						4.000							.059/.062										160,000
LJS6496																	6.000																	240,000
LJS7272			4.500								4.626/4.627						4.500							.059/.062										202,500
LJS8080			5.000								5.126/5.127						5.000							.059/.062										250,000
LJS8888			5.500								5.626/5.627						5.500							.059/.062										302,500
LJS9696			6.000								6.126/6.127						6.000							.059/.062										360,000
Part number example: LJS1224 is a liner with .750 in. bore, 1.50 in. long. Larger diameters can be supplied. These bearings slip into the housing bore and may require positive retention. For bearing installation other than that shown on page 24, consult Transport Dynamics engineering department.
LINER TYPE NON-METALLIC Fiberglide® JOURNAL BEARINGS 11
®
B E A R I N G S
Fibriloid® SJS Series Solid Journal Bearings were developed for high impact demanding appli- cations in mining, large construction equipment, cranes, and heavily loaded military vehicles. The standard line is supplied with Fibriloid® self-lubri- cated bearing liners. Other materials and liners are available upon consultation with the Transport Dynamics engineering department. These com- ponents can also be supplied with seals for demanding applications in contaminated fluid environments.																									Series SJS *Recommended housing bores are for steel housings. Contact engineering for recommended housing dimensions for alternate materi- als.
SOLID MACHINED BEARING
PART NUMBER				RECOMMENDED SHAFT DIAMETER MIN/MAX (in.)							RECOMMENDED* HOUSING BORE MIN/MAX (in.)						BEARING LENGTH (in.) +.000 -.010							WALL THICKNESS (in.) REF										STATIC LOAD (lbf)
SJS1616																	1.000							0.250										30,000
SJS1620 SJS1624				.9980/1.000							1.4984/1.5000						1.250 1.500							.250 .250										37,500 45,000
SJS1632																	2.000							0.250										60,000
SJS2016																	1.000							0.250										37,500
SJS2020 SJS2024				1.2475/1.2500							1.7484/1.7500						1.250 1.500							.250 .250										46,875 56,250
SJS2032																	2.000							0.250										75,000
SJS2416																	1.000							0.250										45,000
SJS2420 SJS2424				1.4975/1.5000							1.9982/2.0000						1.250 1.500							.250 .250										56,250 67,500
SJS2432																	2.000							0.250										90,000
SJS2816																	1.000							0.250										52,500
SJS2824 SJS2832				1.7475/1.7500							2.2482/2.2500						1.500 2.000							.250 .250										78,750 105,000
SJS2840																	2.500							0.250										131,250
SJS3216																	1.000							0.250										60,000
SJS3220 SJS3224				1.9970/2.0000							2.4982/2.5000						1.250 1.500							.250 .250										75,000 90,000
SJS3232																	2.000							0.250										120,000
SJS3616																	1.000							0.250										67,500
SJS3624 SJS3632				2.2470/2.2500							2.7482/2.7500						1.500 2.000							.250 .250										101,250 135,000
SJS3648																	3.000							0.250										202,500
SJS4024																	1.500							0.250										112,500
SJS4032 SJS4040				2.4970/2.5000							2.9982/3.0000						2.000 2.500							.250 .250										150,000 187,500
SJS4048																	3.000							0.250										225,000
SJS4424																	1.500							0.250										123,750
SJS4432 SJS4448				2.747/2.7500							3.4978/3.5000						2.000 3.000							.250 .250										165,000 247,500
SJS4824																	1.500							0.250										135,000
SJS4832 SJS4848				2.9970/3.0000							3.7478/3.7500						2.000 3.000							.250 .250										180,000 270,000
SJS5632																	2.000							0.250										210,000
SJS5648 SJS5656				3.4970/3.500							4.2478/4.2500						3.000 3.500							.250 .250										315,000 367,500
SJS6432																	2.000							0.250										240,000
SJS6448 SJS6464				3.997/4.000							4.7475/4.7500						3.000 4.000							.250 .250										360,000 480,000
SJS7232																	2.000							0.250										270,000
SJS7248 SJS7264				4.497/4.500							5.2475/5.2500						3.000 4.000							.250 .250										405,000 540,000
SJS8040																	2.500							0.250										375,000
SJS8048 SJS8064				4.997/5.000							5.7475/5.7500						3.000 4.000							.250 .250										450,000 600,000
Part number example: SJS2024 is a steel journal bearing with 1.25 in. bore, 1.50 in. long Larger diameters can be supplied. 12 Fiberglide®/Fabroid® JOURNAL BEARINGS SOLID JOURNAL BEARING
®
B E A R I N G S
Phenolic-backed Fiberglide® thrust bearings provide high load capacity and low friction for use where the elimination of lubrication is desirable. Typical applications include industrial valves and valve actuators, vehicle kingpin assemblies and marine drives. Non-metallic and hence non-corrosive, these Fiberglide® thrust bearings are lightweight and are fabricated of Fiberglide® fibers backed by a laminated phenolic resin system. Double sided construction extends bearing life. It is important that mating surfaces be smooth and free from sharp edges. Maximum compressive strength is 10,000 psi, with operating temperature range of -250°F to 200°F. For bearing installation, see page 24.
PHENOLIC-BACKED THRUST WASHERS
PART NUMBER				MAXIMUM SHAFT DIAMETER (in.)							I.D. +.020 – .000 (in.)						O.D. +.000 – .020 (in.)							WALL THICKNESS ±.002 (in.)										STATIC LOAD (lbf)
LTD0408				0.250							0.280						0.500							0.031										1,348
LTD0510				0.312							0.344						0.625							0.031										2,138
LTD0612				0.375							0.406						0.750							0.031										3,123
LTD0714				0.437							0.468						0.875							0.031										4,293
LTD0816				0.500							0.531						1.000							0.031										5,639
LTD0918				0.562							0.593						1.125							0.063										7,178
LTD1020				0.625							0.656						1.250							0.063										8,892
LTD1122				0.687							0.718						1.375							0.063										10,800
LTD1224				0.750							0.781						1.500							0.063										12,880
LTD1326				0.812							0.843						1.625							0.063										15,158
LTD1428				0.875							0.906						1.750							0.063										17,605
LTD1530				0.937							0.968						1.875							0.063										20,252
LTD1632				1.000							1.031						2.000							0.063										23,067
LTD1834				1.125							1.156						2.125							0.063										24,969
LTD2036				1.250							1.281						2.250							0.063										26,872
LTD2240				1.375							1.406						2.500							0.063										33,560
LTD2442				1.500							1.531						2.625							0.094										35,708
LTD2644				1.625							1.656						2.750							0.094										37,856
LTD2846				1.750							1.781						2.875							0.094										40,004
LTD3048				1.875							1.906						3.000							0.094										42,152
LTD3252				2.000							2.062						3.250							0.094										49,562
LTD3654				2.250							2.312						3.375							0.094										47,478
LTD4060				2.500							2.562						3.750							0.094										58,893
LTD4466				2.750							2.812						4.125							0.094										71,534
LTD4872				3.000							3.062						4.500							0.094										85,403
LTD5278				3.250							3.312						4.875							0.094										100,499
Part number example: LTD1834 is a double-sided thrust bearing with 1.125 in. bore 2.125 in. O.D. Different thicknesses and larger diameters can be provided and smaller bore diameters are available on request
Series LTD
LAMINATED PHENOLIC-BACKED Fiberglide®/Fabroid® JOURNAL BEARINGS 13
®
B E A R I N G S Fiberglide® Slim Pack thrust bearings are unique in the industry. They need no lubrication, can tolerate extremely high loads and require very little space. (Nominal thickness is only 1/8 in.) The advanced, patented design includes a self-contained dust seal and utilizes materials which resist corrosion. It pro- vides its own smooth internal wear surface which is ideal where cast iron or other rough mating surfaces are present. Slim Pack thrust bearings are particularly suited for such applications as vehicle kingpin assem- blies, and frame hinges. For bearing installation, see page 24.																												Series FTP



I.D.

SLIM PACK THRUST BEARING ASSEMBLY
PART NUMBER				I.D. +.005 +.025 (in.)							O.D. +.010 – .020 (in.)						T ±.010 (in.)							AREA in.2										STATIC LOAD (lbf)
FTP1628				1.000							1.750						0.130							1.25										37,500
FTP2032				1.250							2.000						0.130							1.48										44,400
FTP2436				1.500							2.250						0.130							1.72										51,600
FTP2638				1.625							2.375						0.130							1.84										55,200
FTP2840				1.750							2.500						0.130							1.96										58,800
FTP3244				2.000							2.750						0.130							2.19										65,700
FTP3648				2.250							3.000						0.130							2.43										72,900
FTP4052				2.500							3.250						0.130							2.66										79,800
FTP4072				2.500							4.500						0.130							10.03										300,900
FTP4874				3.000							4.625						0.130							8.72										261,600
Part number example: FTP3648 is a thrust pack with a 2.25 inch I.D. and 3 inch O.D. *T is measured with pack loaded
C
Diagram shows: A. Outer metal shell
B. Fiberglide®/Fabroid® self-lubricating liner C. Inner metal ring hard plate wear surface. Ring rotates against Fiberglide®/Fabroid® liner which is bonded to outer shell.
14 Fiberglide®/Fabroid® JOURNAL BEARINGS SLIM PACK THRUST PACKS
®
B E A R I N G S
Fiberglide® FTS series thrust bearings offer an economical approach to obtaining self-lubrication where high loads are encountered. They are comprised of zinc-plated mild steel with Fiberglide® laminated to one face. These bearings are recommended for use as an alternate to LTD washers in applications where metal backing is preferred. Maximum compressive strength is 38,000 psi, with operating temperature range of -320°F to 300°F. Friction coefficients as low as 0.03 with no added lubricants are obtainable. Fabroid® Liners can also be supplied. For special applications, consult Transport Dynamics engineering department. These thrust bearings can also be supplied with special metals and with liners on both sides (FTD) series.
SINGLE-SIDED METAL BACKED, INCH
PART NUMBER				MAXIMUM SHAFT DIAMETER (in.)							I.D. +.020 – .000 (in.)						O.D. +.000 – .020 (in.)							T ±.002 (in.)										STATIC LOAD (lbf)
FTS0408				0.250							0.280						0.500							0.058										4,043
FTS0510				0.312							0.344						0.625							0.058										6,415
FTS0612				0.375							0.406						0.750							0.058										9,369
FTS0714				0.437							0.468						0.875							0.058										12,879
FTS0816				0.500							0.531						1.000							0.058										16,918
FTS0918				0.562							0.593						1.125							0.058										21,534
FTS1020				0.625							0.656						1.250							0.058										26,675
FTS1122				0.687							0.718						1.375							0.058										32,399
FTS1224				0.750							0.781						1.500							0.058										38,641
FTS1326				0.812							0.843						1.625							0.058										45,473
FTS1428				0.875							0.906						1.750							0.058										52,816
FTS1530				0.937							0.968						1.875							0.058										60,755
FTS1632				1.000							1.031						2.000							0.058										69,200
FTS1834				1.125							1.156						2.125							0.058										74,908
FTS2036				1.250							1.281						2.250							0.058										80,616
FTS2240				1.375							1.406						2.500							0.058										100,681
FTS2442				1.500							1.531						2.625							0.058										107,125
FTS2644				1.625							1.656						2.750							0.058										113,569
FTS2846				1.750							1.781						2.875							0.058										120,013
FTS3048				1.875							1.906						3.000							0.058										126,457
FTS3252				2.000							2.062						3.250							0.058										148,687
FTS3654				2.250							2.312						3.375							0.058										142,434
FTS4060				2.500							2.562						3.750							0.058										176,678
FTS4466				2.750							2.812						4.125							0.058										214,602
FTS4872				3.000							3.062						4.500							0.058										256,209
FTS5278				3.250							3.312						4.875							0.058										301,496
Part number example: FTS1834 is a metal-backed thrust bearing, with 1.125 in. bore, 2.125 in. O.D. Different thicknesses and larger diameters can be supplied.
THRUST WASHER STEEL BACKING Fiberglide®/Fabroid® JOURNAL BEARINGS 15
®
B E A R I N G S
Fiberglide® FTM series thrust bearings offer an economical approach to obtaining self-lubrication where high loads are encountered. They are comprised of zinc-plated mild steel with Fiberglide® laminated to one face. These bearings are recommended for use as an alternate to LTD washers in applications where metal backing is preferred. Maximum compressive strength is 38,000 psi, with operating temperature range of -320°F to 300°F. Friction coefficients as low as 0.03 with no added lubricants are obtainable. Fabroid® Liners can also be supplied for special applications, consult Transport Dynamics engineering department. These thrust bearings can also be supplied with special metals and with liners on both sides (FTD) Series.
SINGLE-SIDED METAL BACKED, METRIC
PART NUMBER				MAXIMUM SHAFT DIAMETER (mm)							I.D. +.508 – .000 (mm)						O.D. +.000 – .508 (mm)							T ±.0508 (mm)										STATIC LOAD (N/mm2)
FTM0820				8							10						20							1.50										48,734
FTM1024				10							12						24							1.50										70,177
FTM1226				12							14						26							1.50										77,975
FTM1632				16							18						32							1.50										113,713
FTM1836				18							20						36							1.50										145,552
FTM2038				20							22						38							1.50										155,949
FTM2240				22							24						40							1.50										166,346
FTM2444				24							26						44							1.50										204,683
FTM2548				25							28						48							1.50										246,919
FTM2850				28							30						50							1.50										259,915
FTM3054				30							32						54							1.50										307,350
FTM3562				35							38						62							1.50										389,873
FTM4066				40							42						66							1.50										421,063
FTM4574				45							48						74							2.00										515,282
FTM5078				50							52						78							2.00										549,071
FTM6090				60							62						90							2.00										691,374
Series FTM
16 Fiberglide®/Fabroid® JOURNAL BEARINGS METALBACKED
®
B E A R I N G S
RBC Bearings has developed a line of maintenance free Fiberglide® Flanged journal bearings which are designed to meet special application demands where an oscillating shaft and thrust play a role in the function of your equipment. Fiberglide® flanged journal bear- ings provide all the advantages of a traditional journal with the added flange for added sup- port and self lubricating control. Carbon steel is normally used as a backing material, with the external surfaces plated to resist corrosion. Other metals can be supplied upon special order. Typical applications include construction equipment, farm equipment, and material handling equipment, and marine environments.
FLANGED JOURNAL BEARINGS
PART NUMBER		RECOMMENDED SHAFT DIAMETER MIN/MAX (in.)						RECOMMENDED* HOUSING BORE MIN/MAX (in.)						BEARING LENGTH (in.) +.000/.200					FLANGE DIA (in.) REF							WALL THICKNESS (in.) REF									STATIC LOAD (lbf)
CJF0806		.4986/.5000						.5930/.5940						0.375					0.8435							0.047									5,625
CJF0812														0.750																					11,250
CJF1006		.6234/.6250						0.7180/.7190						0.375					0.9685							0.047									7,500
CJF1008														0.500																					9,375
CJF1206 CJF1208		.7480/.7500						.8745/.8755						.375 .500					1.125							0.063									8,437 11,250
CJF1216														1.000																					22,500
CJF1408		.8730/.8750						.9995/1.0005						0.500					1.250							0.063									13,125
CJF1416														1.000																					26,250
CJF1608 CJF1612		.9980/1.000						1.1245/1.1255						.500 .750					1.375							0.063									15,000 22,500
CJF1616														1.000																					30,000
CJF2016		1.2475/1.2500						1.4055/1.4065						1.000					1.781							0.0780									375,000
Series CJF
SELF LUBRICATING MAINTENANCE FREE Fiberglide®/Fabroid® JOURNAL BEARINGS 17
®
B E A R I N G S
The outer ring is swaged over the ball to provide maximum race to ball conformity. The inner ring, ball is a fully hardened ball which provides strength when clamped in the application. Aerospace-grade materials are used in our swaged bearings. The race is CRES 17-4PH, AMS5643, HRC 28 min, and the balls are CRES 440C, AMS5630, HRC 55min. The liner is Fibriloid® qualified to AS81820. Swaged bearings are constructed and equipped with a self-lubricating liner system to reduce friction. These bearings provide misalignment and high load carrying capacity. Features include high temperature-low wear -65°F to +325° (-53.9°C +162.8°C)
SELF-LUBRICATED SPHERICAL BEARINGS, NARROW
Dimensions — Tolerances																		Load Ratings
MS14104 Chamfered Part Numbers	B +.0000, -.0005 in.				D +.0000, -.0005 in.		H ±.005 in.		W +.000, -.002 in.			A Min. in.		C(1) +.010, -.000 in.		X° Ref.		Oscillating Radial Load Rating(3) lbf.					Radial Limit Load Rating(3) lbf.					Axial Limit Load Rating(3) lbf.				No Load Rotational Breakaway Torque (Standard) in.-lbs.				Weight Max. Ref. lbs.
0382303	0.1900				0.6250		0.218		0.281			0.293		0.010		10		1,500					3,975					150				.25-5				0.02
0382304	0.2500				0.6562		0.250		0.343			0.364		0.010		10		3,320					6,040					430				.25-5				0.02
0382305(1)	0.3125				0.7500		0.281		0.375			0.419		0.010		10		5,460					8,750					700				.25-8				0.03
0382306	0.3750				0.8125		0.312		0.406			0.475		0.020		9		6,600					10,540					1100				.25-8				0.04
0382307	0.4375				0.9062		0.343		0.437			0.530		0.020		8		8,050					13,200					1400				.25-8				0.05
0382308	0.5000				1.0000		0.390		0.500			0.600		0.020		8		10,400					17,900					2100				.25-8				0.07
0382309	0.5625				1.0937		0.437		0.562			0.670		0.020		8		13,000					23,200					3680				.25-8				0.09
0382310	0.6250				1.1875		0.500		0.625			0.739		0.020		8		16,450					30,500					4720				.25-8				0.12
0382312	0.7500				1.4375		0.593		0.750			0.920		0.030		8		23,600					46,400					6750				.25-8				0.21
0382314	0.8750				1.5625		0.703		0.875			0.980		0.030		8		32,050					62,200					9350				.25-12				0.27
0382316	1.0000				1.7500		0.797		1.000			1.118		0.030		9		38,000					82,200					12160				.25-12				0.39
(3)GLoad rating based on AS81820. -3 and -4 sizes are limited by pin bending.
18 Fibriloid® JOURNAL BEARINGS SELF-LUBRICATED SPHERICAL BEARINGS
®
B E A R I N G S
SELF-LUBRICATED SPHERICAL BEARINGS, WIDE
Dimensions — Tolerances																		Load Ratings
MS14102 Chamfered Part Numbers	B +.0000, -.0005 in.				D +.0000, -.0005 in.		H ±.005 in.			W +.000, -.002 in.		A Min. in.			C(1) +.010, -.000 in.		X° Ref.	Oscillating Radial Load Rating(3) lbf.						Radial Limit Load Rating(3) lbf.						Axial Limit Load Rating(3) lbf.			No Load Rotational Breakaway Torque (Standard) in.-lbs.				Weight Max. Ref. lbs.
0382403	0.1900				0.6250		0.327			0.437		0.300			0.010		15	4,900						2,500						1,770			.25-5				0.031
0382404	0.2500				0.6250		0.327			0.437		0.300			0.010		15	4,900						5,500						1,770			.25-5				0.031
0382405	0.3125				0.6875		0.317			0.437		0.360			0.010		14	6,050						9,400						1,640			.25-8				0.035
0382406	3750				8125		0.406			0.500		0.466			0.020		8	8,310						13,700						2,630			.25-8				0.060
0382407	0.4375				0.9375		0.442			0.562		0.537			0.020		10	11,750						20,700						3,650			.25-8				0.080
0382408	0.5000				1.0000		0.505			0.625		0.607			0.020		9	14,950						21,400						4,970			.25-8				0.100
0382409	0.5625				1.1250		0.536			0.687		0.721			0.020		10	18,100						26,600						5,370			.25-8				0.135
0382410	0.6250				1.1875		0.567			0.750		0.747			0.020		12	20,250						29,000						6,130			.25-8				0.160
0382412	0.7500				1.3750		0.630			0.875		0.845			0.030		13	26,200						37,000						7,730			.25-8				0.240
0382414	0.8750				1.6250		0.755			0.875		0.995			0.030		6	33,600						65,200						10,800			.25-12				0.350
0382416	1.0000				2.1250		1.005			1.375		1.269			0.030		12	56,250						104,000						19,300			.25-12				0.970

Product Number

Please Share This Share this content

You Might Also Like

Joint Rod End Bearings CM3* CM4* CM5* CM6 CM7 CM8 CM10 CM12 CF4-3 CF4 CF5 CF6 CF7

Rod Ends and Spherical Bearings HM3 HML4 HM4C HM7C HM5CG

Rod Ends & Spherical Plain Bearing SAR1-10 SAR1-12 SAR1-15 SAR1-17

Leave a Reply Cancel reply

Share this content